It looks like you are visiting us from . Would you like to be taken to our European website?
Rugged Panel PC with Intel Pentium CPU and Ignition Software
- Intel Pentium N4200 processor
- Up to −20°C ~ 70°C Operating Temperature Range
- 8" − 24" Touchscreen Displays
A VERSATILE IGNITION PANEL PC
The IGN310 is built to survive in a wide range of HMI applications, with Intel Apollo Lake processing and 5-wire resistive or projected capacitive touch panel displays. Powered by the Pentium N4200 processor, and paired with up to 8 GB of DDR3L RAM, the IGN310 offers efficient yet responsive Quad-Core performance. 4G capable for remote network access and failover protection, the IGN310 can be paired with the touch panel of your choice including sunlight readable, high resolution, or widescreen options.
DESIGNED TO SURVIVE
With its innovative panel + PC modular design, the IGN310 makes upgrades, screen replacement or mix and match customization easy. Fanless and ventless constructions keeps airborne contaminants out while protecting sensitive internal components, greatly increasing the lifespan of the system. The IGN310 is cable-less and jumper-less, helping the system maintain high shock and vibration resistance. With an operating temperature range of up to -20°C to 70°C (depending on the screen size), and an input voltage range of 9~48 volts, the IGN310 was built to last, no matter where you need to install it.
EASILY CONNECT TO ANYTHING
Unique amongst panel PCs, the IGN310 has a fully featured I/O coastline utilizing all four sides of the system. Eight isolated DIO, four RS-232/422/485 COM and four USB 3.0 ports are spread along the sides of the system. In addition, the IGN310 is capable of driving triple independent displays through VGA, DisplayPort and a variety of additional display modules. Ignition-sensing and PoE functionality can also be added if needed. A protective plate on the bottom of the case allows access to an externally accessible SIM card slot and 2.5” drive for easy swapping.
This system is compatible with our Extrovert 4G LTE technology, an integrated modem pre-certified to operate on many of the world’s most popular cellular carrier networks. Extrovert 4G LTE hardware is ideal for today's mobile, edge computing and Industrial Internet of Things applications. To take advantage of this feature, simply configure your system with Extrovert 4G LTE connectivity and then contact your carrier to activate.
|8.4"||10.4"||10.4" High-Res||12.1"||12.1" High-Res||15"|
|Resolution||800 x 600 (SVGA)||800 x 600 (SVGA)||1024 x 768 (XGA)||800 x 600 (SVGA)||1024 x 768 (XGA)||1024 x 768 (XGA)|
|Operating Temperature||-20°C to 70°C||-20°C to 70°C (Res)-10°C to 70°C (Cap)||-20°C to 70°C (Res)-10°C to 70°C (Cap)||-20°C to 70°C||-20°C to 70°C||0°C to 65°C|
|15" Wide||17"||19"||21.5" Wide||24" Wide|
|Resolution||1366 x 768 (WXGA)||1280 x 1024 (SXGA)||1280 x 1024 (SXGA)||1920 x 1080 (Full HD)||1920 x 1080 (Full HD)|
|Operating Temperature||0°C to 60°C||-20°C to 70°C||0°C to 50°C||0°C to 60°C||-10°C to 60°C (Res)-20°C to 70°C (Cap)|
|Processor||Intel Pentium N4200|
|Processor Speed||1.1 GHz|
|Processor Socket||Onboard (BGA)|
|Processor Generation||Apollo Lake|
|Chipset||Shared with CPU|
|Graphics/GPU||Intel HD Graphics 505|
|Memory Type||DDR3L SO-DIMM (non-ECC)|
|Memory Capacity||8 GB|
|Memory Speed||1866 MHz|
|Memory Slot Count||1.000000|
|Number of Displays Supported||3|
|Rear I/O||1 VGA port 1 DisplayPort connector 2 Gb LAN ports 4 RS-232/422/485 COM ports 4 USB 3.2 Gen 1 ports 1 Line-Out 1 Mic-In 1 ATX power On/Off button 1 AT/ATX Mode Switch 1 2-pin terminal block remote power On/Off connector 1 reset button 1 clear CMOS switch 8 Isolated DIO (4x DI/4x DO) via 10-pin terminal block 1 3-pin Terminal Block Power Input connector (9~48V)|
|Expansion Options||2x Cincoze CFM slots
2x mPCIe (1 full or half-size mux mSATA and 1 full-size)
1x SIM Card socket (external)
|Storage Options||2.5" HDD/SSD
mSATA (shared with mPCIe slot)
|LAN Controller||Intel I210-AT GbE|
|System Monitoring||Watchdog Timer|
|Input Voltage||9~48 VDC|
|Power Input||3-pin Terminal Block|
|Operating Temperature Range||-40 ~ 70°C|
|Operating Humidity||10% - 95% (non-condensing)|
|Shock Tolerance (Operating)||Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, according to IEC60068-2-27)|
|Vibration Tolerance (Operating)||Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64)|
|Dimensions (WxHxD)||204.5 x 41.5 x 149 mm 8.05" x 1.63" x 5.87"|
|Case Material||Aluminum Extrusion|
|Port Punchouts||4 Antenna Holes|
|Mounting Options||DIN-mount (included)
Wall-mount (kit included)
|Manufacturer Launch Date||Q2'18|
|Regulatory Information||FCC 47 CFR Part 15
WEEE Directive (2002/96/EC)
ErP Directive (2009/125/EC)
Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU)
Radio Equipment Directive (2014/53/EU) - For configurations with wireless transmitters
RoHS 2 (2011/65/EU)
RoHS 3 (2015/863/EU)
|Warranty||2 Year Limited Warranty on parts and services|
|Manufacturer's Product Page||For more information, please see this product's webpage|
|Hardware Type||SCADA Controllers|
You're about to leave your items behind! When changing stores, the items in your cart or links to system configurations that have been shared with you will not carry over. Don't worry, your cart and links will be waiting for you should you return.
The link to this system configuration has expired. Please reconfigure this system to your specifications. If you need help, contact us at +31 88 5200 700.
The configuration you are trying to view is no longer available. The product will be shown with its default configuration. Please contact us if you have any questions, at +31 88 5200 700.