£2,333.16 £1,928.23
Please call us at 03300 104 290, for compatibility information and to configure.
5 year warranty protection, 24/7 support, advance replacement and more!
Get Details
The IGN310 is built to survive in a wide range of HMI applications, with Intel Apollo Lake processing and 5-wire resistive or projected capacitive touch panel displays. Powered by the Pentium N4200 processor, and paired with up to 8 GB of DDR3L RAM, the IGN310 offers efficient yet responsive Quad-Core performance. 4G capable for remote network access and failover protection, the IGN310 can be paired with the touch panel of your choice including sunlight readable, high resolution, or widescreen options.
With its innovative panel + PC modular design, the IGN310 makes upgrades, screen replacement or mix and match customization easy. Fanless and ventless constructions keeps airborne contaminants out while protecting sensitive internal components, greatly increasing the lifespan of the system. The IGN310 is cable-less and jumper-less, helping the system maintain high shock and vibration resistance. With an operating temperature range of up to -20°C to 70°C (depending on the screen size), and an input voltage range of 9~48 volts, the IGN310 was built to last, no matter where you need to install it.
Unique amongst panel PCs, the IGN310 has a fully featured I/O coastline utilizing all four sides of the system. Eight isolated DIO, four RS-232/422/485 COM and four USB 3.0 ports are spread along the sides of the system. In addition, the IGN310 is capable of driving triple independent displays through VGA, DisplayPort and a variety of additional display modules. Ignition-sensing and PoE functionality can also be added if needed. A protective plate on the bottom of the case allows access to an externally accessible SIM card slot and 2.5” drive for easy swapping.
This system can be configured with an integrated cellular modem, pre-certified to operate on many of the world’s most popular cellular carrier networks. Our 4G capable hardware is ideal for today's mobile, edge computing and Industrial Internet of Things applications. The wireless connectivity has been tested to operate reliably in challenging Electromagnetic Compatibility (EMC) environments. Many of our systems also include co-location options allowing you to implement Wi-Fi and Bluetooth, in addition to cellular connectivity, at the same time. To take advantage of cellular connectivity, simply configure your system with one of our available cellular modems and then contact your carrier to activate.
| 8.4" | 10.4" | 10.4" High-Res | 12.1" | 12.1" High-Res | 15" | |
|---|---|---|---|---|---|---|
| Resolution | 800 x 600 (SVGA) | 800 x 600 (SVGA) | 1024 x 768 (XGA) | 800 x 600 (SVGA) | 1024 x 768 (XGA) | 1024 x 768 (XGA) |
| Brightness | 400 | 400 | 400 | 450 | 500 | 350 |
| Contrast Ratio | 600:1 | 700:1 | 1400:1 | 800:1 | 700:1 | 800:1 |
| Operating Temperature | -20°C to 70°C | -20°C to 70°C (Res)-10°C to 70°C (Cap) | -20°C to 70°C (Res)-10°C to 70°C (Cap) | -20°C to 70°C | -20°C to 70°C | 0°C to 65°C |
| 15" Wide | 17" | 19" | 21.5" Wide | 24" Wide | |
|---|---|---|---|---|---|
| Resolution | 1366 x 768 (WXGA) | 1280 x 1024 (SXGA) | 1280 x 1024 (SXGA) | 1920 x 1080 (Full HD) | 1920 x 1080 (Full HD) |
| Brightness | 400 | 350 | 350 | 300 | 300 |
| Contrast Ratio | 500:1 | 800:1 | 1000:1 | 5000:1 | 5000:1 |
| Operating Temperature | 0°C to 60°C | -20°C to 70°C | 0°C to 50°C | 0°C to 60°C | -10°C to 60°C (Res)-20°C to 70°C (Cap) |
| SKU | IGN310 |
|---|---|
| Hardware Line | Rugged |
| Cooling Type | Fanless |
| Processor | Intel Pentium N4200 |
| Processor Speed | 1.1 GHz |
| Processor Socket | Onboard (BGA) |
| Processor Generation | Apollo Lake |
| Processor Cores | 4 |
| Chipset | Shared with CPU |
| Graphics/GPU | Intel HD Graphics 505 |
| Memory Type | DDR3L SO-DIMM (non-ECC) |
| Memory Capacity | 8 GB |
| Memory Speed | 1866 MHz |
| Memory Slot Count | 1.000000 |
| Number of Displays Supported | 3 |
| Rear I/O | 1 VGA port 1 DisplayPort connector 2 Gb LAN ports 4 RS-232/422/485 COM ports 4 USB 3.2 Gen 1 ports 1 Line-Out 1 Mic-In 1 ATX power On/Off button 1 AT/ATX Mode Switch 1 2-pin terminal block remote power On/Off connector 1 reset button 1 clear CMOS switch 8 Isolated DIO (4x DI/4x DO) via 10-pin terminal block 1 3-pin Terminal Block Power Input connector (9~48V) |
| Expansion Options | 2x Cincoze CFM slots 2x mPCIe (1 full or half-size mux mSATA and 1 full-size) 1x SIM Card socket (external) |
| Storage Options | 2.5" HDD/SSD mSATA (shared with mPCIe slot) |
| LAN Controller | Intel I210-AT GbE |
| System Monitoring | Watchdog Timer |
| Input Voltage | 9~48 VDC |
| Power Input | 3-pin Terminal Block |
| Operating Temperature Range | -40 ~ 70°C |
| Operating Humidity | 10% - 95% (non-condensing) |
| Shock Tolerance (Operating) | Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, according to IEC60068-2-27) |
| Vibration Tolerance (Operating) | Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) |
| Dimensions (WxHxD) | 204.5 x 41.5 x 149 mm 8.05" x 1.63" x 5.87" |
| Case Type | Compact Fanless Ruggedized |
| Case Material | Aluminum Extrusion |
| Port Punchouts | 4 Antenna Holes |
| Regulatory Information | FCC 47 CFR Part 15 CE WEEE Directive (2002/96/EC) ErP Directive (2009/125/EC) Low Voltage Directive (2014/35/EU) Electromagnetic Compatibility Directive (2014/30/EU) Radio Equipment Directive (2014/53/EU) - For configurations with wireless transmitters RoHS 2 (2011/65/EU) RoHS 3 (2015/863/EU) REACH EN 55024 EN 55032 EN 60950-1 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 EN 61000-4-11 IEC 62368-1 |
| Warranty | 2 Year Limited Warranty on parts and services |
| Manufacturer's Product Page | For more information, please see this product's webpage |
| Notes |
|
| Hardware Type | SCADA Controllers |
The link to this system configuration has expired. Please reconfigure this system to your specifications. If you need help, contact us at 03300 104 290.
The configuration you are trying to view is no longer available. The product will be shown with its default configuration. Please contact us if you have any questions, at 03300 104 290.
