Embux ICM-3011 3.5" NXP i.MX6 ARM Motherboard

3.5" motherboard featuring ARM NXP i.MX6 DualLite processing, offering a versatile solution with a small footprint. Pre-loaded with Android 5.0.2 (Lollipop).
  • NXP i.MX6 Cortex-A9 Processor
  • 2 USB, Gb LAN, HDMI
  • 2 GB of on-board DDR3 RAM
The maximum allowed quantity for this selection is 1. Your quantity has been adjusted.

Call for More Information

+1 802 861 2300

Configure & Buy
Customize Embux ICM-3011 3.5" NXP i.MX6 ARM Motherboard
Embux ICM-3011 3.5" NXP i.MX6 Motherboard Out of Stock
- +
Power Adapter DC 36 W, 12 V, 3 A - Interchangeable Plug

Power Adapter DC 36 W, 12 V, 3 A - Interchangeable Plug

  • 36 watts
  • 12 VDC output
  • Includes North America, EU, UK, Australia plugs
Open Product in a New Tab
- +
- +

* Required Fields



The ICM-3011 from Embux is a low profile, 3.5” motherboard that features next generation ARM processing and a versatile array of industrial I/O.



Driven by the NXP i.MX6 Cortex-A9 processor, the ICM-3011 takes advantage of improved graphics processing and performance to offer a 25% increase in performance per core than its predecessor. With 2GB of DDR3 memory and a robust suite of onboard connectors, the ICM-3011 is a scalable, highly power-efficient platform ideal for a broad range of networking, enterprise and mobile solutions.



Despite its compact form factor, the ICM-3011 offers a rich array of I/O including 4 USB 2.0 ports (2 internal), a 1920 x 1080 capable HDMI port, one LAN port, one standard SD and one SDIO slot, 2 18/24-bit LVDS outputs, 4GB eMMC NAND and 8MB NOR flash. The addition of CAN bus, GPIO, and a wide input voltage of 10.8~26.4 volts make the ICM-3011 a highly versatile option for a range of industrial automation needs. With support for a range of operating systems, including both Android and Yocto Linux, the ICM-3011 can be easily customized to suit your individual application.



The ICM-3011 has been engineered to meet the needs of more demanding industrial environments with a jumper-less and all solid capacitor design. Consuming only 3.5 W of power, the ICM-3011 board offers power efficiency and performance optimization without limiting its versatility. Boasting an operating temperature range of -20 to 70 degrees C and offering expansion with a SIM card socket and dual full/half size mini PCIe slots, the ICM-3011 is ideal for users searching for a highly versatile ARM computing solution.

Built and tested Industrial Computers

Upgrade To A Full System

Custom built to your specs and fully tested

Try The System Finder 
Man holding computer

Personalized Attention

Take advantage of end-to-end project support

Learn More 
Technical Specs
More Information
Manufacturer Launch Date Q2'15
Expected Life Cycle 5 Years
Processor NXP i.MX 6 DualLite
Processor Speed 1.0 GHz
Processor Generation Cortex-A9
Processor Cores 2
Display Resolution 1920 x 1080 (HD 1080)
Memory Speed 800 MHz
Memory Type DDR3 Onboard
Expansion Options 2x mPCIe (full or half-size)
1x SIM Card socket
Front I/O 1 DC jack
2 USB 2.0 port
1 Gb LAN port
1 RS-485 COM port (3.5mm terminal block)
1 HDMI port
1 Reset button
2 Audio jacks; line-out, mic-in
Rear I/O 1 Micro USB (device mode only)
Onboard Connectors 2 USB 2.0 headers
4 RS-232 port (8-wire)
2 RS-232 port (4-wire)
1 RS-485 port (miscellaneous header)
2 CAN bus (miscellaneous header)
8 GPIO header
1 Line-in header
1 Power input connector
2 Speaker out connectors
1 I2C connector
1 SPI pin header
1 10-bit DIP switch
1 Front panel connector
2 LVDS connectors (18/24-bit)
System Monitoring Watchdog Timer
Operating Temperature Range -20 ~ 70°C
Operating Humidity 5% ~ 95%
Power Input DC Jack
Input Voltage 10.8 ~ 26.4 VDC
Dimensions (WxHxD) 146 x 16.16 x 72mm
5.75" x 0.63" x 2.83"
Update Your Browser
You are using a web browser that isn't supported by OnLogic

Microsoft Internet Explorer version 11 and older, are not supported. You will experience challenges using our site and the checkout will not work. To get a better experience, go to one of these sites and get the latest version of your preferred browser.

We try to respond within the same business day.

If you need immediate pricing, call +1 802 861 2300.

Thank You For Your Request

Your request has been received by our Sales Team who will review the details and provide you with a quote.

If your project is time sensitive, please give us a call at +1 802 861 2300.

We can't process your request right now.



Success You have successfully shared this product

We can't process your request right now.

The link to this system configuration has expired. Please reconfigure this system to your specifications. If you need help, contact us at +1 802 861 2300.

The configuration you are trying to view is no longer available. The product will be shown with its default configuration. Please contact us if you have any questions, at +1 802 861 2300.