It looks like you are visiting us from . Would you like to be taken to our European website?
M2-ATX Automotive DC-DC Power Supply, 160 W
SKU
M2-ATX
Wide input (6~24 V) 160-watt DC-DC intelligent power supply that can control the ON/OFF switch of a mainboard based on the ignition status.
- 160 watts
- 6 ~ 24 V Input
- 2-PEM Mounting
€89.54
€74.00
In Stock
Overview
The M2-ATX is an intelligent, high power, vehicle (car/boat/electric cart) 12-volt DC-DC ATX PC power supply designed for car PC and battery powered applications. Designed to provide power and to control the ON/OFF switch of a mainboard (car PC) based on ignition status. The M2-ATX is a wide input (6~24 V) vehicle/car/battery operated ATX power supply capable of surviving tough car engine cranks (down to 6 volts) as well as transient over-voltage situations. Just connect it to your car/boat/RV/solar battery and power up your PC.
The M2-ATX comes with complete cable harness consisting of:
M2-ATX has 8 user-selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown car PC timing schemes via a built-in shutdown controller. By removing all user-selectable jumpers, the M2-ATX becomes a traditional PC PSU with no ignition control (shutdown controller bypassed) and it can be used in non-vehicle computer applications.
Even if your computer is off, a PC will still consume a few hundred milliwatts, needed to monitor PC ON/OFF status. When the computer (car pc) is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is a few watts. No matter how big your car battery is, it will eventually drain your vehicle battery in a matter of days.
While in deep sleep mode, the M2-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down (using a built-in shutdown controller) until the battery reaches safe levels again.
Compatibility with other Mini-ITX components: The M2-ATX is form factor compatible with the VoomPC enclosure and with most Casetronic and Morex enclosures. It is footprint compatible with the M1-ATX. This power supply is not compatible with our line of Serener fanless cases.
See all our Industrial Embedded Computers
View all components
The M2-ATX comes with complete cable harness consisting of:
- ATX cable extender plus HDD and Floppy power (9")
- SATA power cable
- Cable harness includes connectors for: 1 Molex, 1 Berg, 1 SATA, 2 ATX
- Power input cable harness terminated in 0.25' fastons (12")
- 2-pin M/B on/off power ON control wire harness (9")
M2-ATX has 8 user-selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown car PC timing schemes via a built-in shutdown controller. By removing all user-selectable jumpers, the M2-ATX becomes a traditional PC PSU with no ignition control (shutdown controller bypassed) and it can be used in non-vehicle computer applications.
Even if your computer is off, a PC will still consume a few hundred milliwatts, needed to monitor PC ON/OFF status. When the computer (car pc) is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is a few watts. No matter how big your car battery is, it will eventually drain your vehicle battery in a matter of days.
While in deep sleep mode, the M2-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down (using a built-in shutdown controller) until the battery reaches safe levels again.
Compatibility with other Mini-ITX components: The M2-ATX is form factor compatible with the VoomPC enclosure and with most Casetronic and Morex enclosures. It is footprint compatible with the M1-ATX. This power supply is not compatible with our line of Serener fanless cases.
Downloads:
Upgrade to an Embedded Industrial System
Custom built to your specs and fully tested.
Delivered to your location in just a couple of days.
Get an embedded component kit
Find all the components you need for
embedded industrial computing right here at OnLogic
Technical Specs
| SKU | M2-ATX |
|---|---|
| Input Voltage | 6~24 VDC |
| Output Voltage | 12 V |
| Output Power | 160 W |
| Cable Connectors | ATX 20-pin Berg Molex SATA Power |
| Dimensions (WxHxD) | 160 x 19 x 45mm |
| Notes | M2-ATX-HV provides up to 8 amps on the 12-volt rail, making it ideal for operating most Core 2 Duo, Celeron, and AMD systems. Low power Geode and VIA processors (C3, C7) will work as well, leaving ample power for 12-volt or 5-volt peripherals (multiple 3.5" HDDs, CD-ROM, etc). |