Helix 310 harnesses the enhanced power and capabilities of the latest Intel® Celeron® and Pentium® processors (formerly Elkhart Lake) in a low profile fanless system built for the challenges of the IoT Edge.
  • Intel Elkhart Lake Celeron N6211 or Pentium J6426
  • 3 DisplayPorts and up to 2 LAN
  • Expansion for DIO, COM or CAN Bus
The maximum allowed quantity for this selection is 1. Your quantity has been adjusted.

Call for More Information

+31 88 5200 700

OnLogic Helix 310 Intel Elkhart Lake Industrial Edge Computer


Like all of the systems in the innovative Helix Series, the Helix 310 was built to thrive at the edge. Powered by the Dual-Core Intel Celeron N6211, or Quad-Core Intel Pentium J6426 processors, which have been specifically engineered for IoT applications, Helix 310 offers a unique combination of features, power and connectivity, making it an ideal Industrial IoT gateway, edge device or embedded controller.



At less than 1.5" tall, the Helix 310 can be installed in almost any industrial application, with support for DIN, and wall mounting. Sensitive internal components are mechanically protected from dust, debris, chemicals, and moisture with OnLogic's integrated Hardshell™ technology. Meanwhile, the absence of any moving parts dramatically improves the lifespan and reliability of the system. Its advanced industrial design includes a filtered DC input power supply with a 12~24 V range. All of the I/O has been immunity tested to both the EN 55035 for IT equipment and to 60601-1 4th edition Medical immunity - including the 15kV ESD & 10V/m RF immunity tests. Medical immunity protects the computer at a level almost 2x and in some cases up to 30x more than the CE computer standard required limits. The HX310 is currently being safety listed under UL/IEC 62368-1. When used as communication equipment, this unique computer will integrate seamlessly into UL 61010 (former UL 508) applications.

OnLogic Helix 310 Intel Elkhart Lake Industrial Edge Computer
OnLogic Helix 310 Intel Elkhart Lake Industrial Edge Computer


Connectivity is key for any IoT project, which is why the Helix 310 features a well-equipped I/O coastline and available ModBay expansion to further customize your interface options. Standard I/O includes 3 USB 3.2 & 3 USB 2.0 ports, 1 DB9 (RS-232/422/485) optionally configurable as CAN (COM can be configured on request), 3 DisplayPorts, 1 Gb LAN port (2 LAN available when equipped with a Pentium CPU) and SIM Slot for use with available 4G LTE connectivity. OnLogic's unique ModBay expansion options allow you to add DIO, CAN Bus or additional COM, LAN or wireless antennas. Whatever you need to connect with, or connect to, Helix 310 has you covered.



This system can be configured with an integrated cellular modem, pre-certified to operate on many of the world’s most popular cellular carrier networks. Our 4G capable hardware is ideal for today's mobile, edge computing and Industrial Internet of Things applications. The wireless connectivity has been tested to operate reliably in challenging Electromagnetic Compatibility (EMC) environments. Many of our systems also include co-location options allowing you to implement Wi-Fi and Bluetooth, in addition to cellular connectivity, at the same time. Contact our team to learn more about how to configure this system with cellular connectivity.

Extrovert 4G LTE Connected Computers
Windows Compatibility: Please note, this system is compatible with Windows IoT only.




Custom branded computers

Product Customization

Add your brand and the features you need

Learn More 
Man holding computer

Personalized Attention

Take advantage of end-to-end project support

Learn More 
Technical Specs
More Information
Hardware Line Industrial (Fanless)
Cooling Type Fanless
Processor Intel Celeron N6211 or Pentium J6426
Processor Speed 1.20 GHz to 3.0 GHz
Processor Socket Onboard (BGA)
Processor Generation Elkhart Lake
Processor Cores 2
Graphics/GPU Intel UHD Graphics
Memory Type DDR4 SO-DIMM (non-ECC)
Memory Capacity 32 GB
Memory Speed 3200 MHz
Memory Slot Count 2.000000
Number of Displays Supported 3
Rear I/O 3 Full size DisplayPort 1.4 with CEC support by optional add-on module
1 Gb LAN (2 Gb LAN optional with Pentium J6425)
2 USB 3.2
2 USB 2.0
3 Antenna punch outs
1 Kensington Lock
1 Barrel Jack with 12~24 V input (terminal block optional)
Front I/O 1 Power LED button
1 3.5 mm Audio headset (mic-in, line-out)
1 USB 2.0
1 USB 3.2
1 2FF-Sim slot
2 COM ports (RS-232/422/485) (Optional)
Expansion Options 1x M.2 2230 E-key (PCIe x1; USB 2.0)
Storage Options 1x M.2 2242/60/80 B-key
1x M.2 2280 M-key
LAN Controller 1x MaxLinear GPY115 or 2x MaxLinear GPY115
Input Voltage 12~24 VDC
Power Input DC Jack
Operating Temperature Range 0 ~ 50°C
Operating Humidity 0% ~ 90%
Dimensions (WxHxD) 196 x 36.75 x 120.8 mm
7.72" x 1.45" x 4.76"
Case Type Fanless
Case Material Aluminum
Port Punchouts 3 Antenna Holes
Mounting Options DIN-mount
Regulatory Information FCC 47 CFR Part 15
WEEE Directive (2002/96/EC)
Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU)
Radio Equipment Directive (2014/53/EU) - For configurations with wireless transmitters
RoHS 3 (2015/863/EU)
EN 301 489-1
EN 301 489-17
EN 55032
EN 55035
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
EN 62368-1
EN 301 328
EN 301 893
IEC 60945 Ed. 4
Warranty 2 Year Limited Warranty on parts and services
Notes This model uses the new Intel GPY115/EC1000S Ethernet controller provided by the Elkhart Lake platform. Currently no mainstream Linux distributions have driver support for the Ethernet ports. Linux is not supported on this model. Intel has not yet provided drivers to enable PXE booting (network booting). PXE is currently not supported.
Hardware Type Edge Devices and IoT Gateways

We try to respond within the same business day.

If you need immediate pricing, call +31 88 5200 700.

Thank You For Your Request

Your request has been received by our Sales Team who will review the details and provide you with a quote.

If your project is time sensitive, please give us a call at +31 88 5200 700.

We can't process your request right now.



Success You have successfully shared this product

We can't process your request right now.

The link to this system configuration has expired. Please reconfigure this system to your specifications. If you need help, contact us at +31 88 5200 700.

The configuration you are trying to view is no longer available. The product will be shown with its default configuration. Please contact us if you have any questions, at +31 88 5200 700.