£1,131.39 £935.03
5 year warranty protection, 24/7 support, advance replacement and more!
Get Details
The IGN 802 is a turn-key certified Inductive Automation industrial controller based on our popular Factor 202 and powered by a Raspberry Pi Compute Module 4 (CM4). You can configure the system with up to 8 GB of RAM, 32 GB of onboard eMMC storage and an M.2 SATA drive up to 2 TB. A combination of performance, power management, inputs/outputs and Ignition software enable the use of the IGN802 for virtually any solution requiring a control, mediation, or data acquisition device.
Fanless, solid state construction, an operating temperature range of -20° to 60°C, and a wide input power range, make IGN802 an ideal industrial deployment platform. Our custom designed carrier board features dual 1 GbE LAN ports, an RS-232/422/485 terminal block connector, a USB 3.2 port, 2x USB 2.0 ports, 1 HDMI, and 1 USB-C management port, used to configure the CM4 module. The IGN802 is an optionally PoE powered device (803.2at) enabling the use of low-power cabling for flexibility when ac power is unavailable.
With 16x digital inputs,16x digital outputs, 4x analog inputs and an 2.4" capacitive touch screen, you have the ability to receive data, program customized input screens and interface with Programmable Logic Controllers (PLCs). Whatever you need to control or connect to, the IGN802 is ready.
This system can be configured with an integrated cellular modem, pre-certified to operate on many of the world’s most popular cellular carrier networks. Our 4G capable hardware is ideal for today's mobile, edge computing and Industrial Internet of Things applications. The wireless connectivity has been tested to operate reliably in challenging Electromagnetic Compatibility (EMC) environments. Many of our systems also include co-location options allowing you to implement Wi-Fi and Bluetooth, in addition to cellular connectivity, at the same time. To take advantage of cellular connectivity, simply configure your system with one of our available cellular modems and then contact your carrier to activate.
| SKU | IGN802 |
|---|---|
| Hardware Line | Industrial (Fanless) |
| Cooling Type | Fanless |
| Processor | Broadcom BCM2711 with ARM Cortex-A72 |
| Processor Speed | 1.5 GHz |
| Processor Generation | Raspberry Pi CM4 |
| Processor Cores | 4 |
| Memory Type | LPDDR4 |
| Memory Capacity | 8 GB |
| Memory Speed | 3200 MHz |
| Number of Displays Supported | 1 |
| Rear I/O | 2x 1GbE LAN (Optional PoE PD Input) 1x RS-232/422/485 5-pin Terminal block 3-pin Terminal Block Power 4x Analog Inputs 2x Temperature input (RT100/1000) 1x SPI/I2C/UART/RS485 Header |
| Front I/O | 1x USB 3.2 Gen 1 port 2x USB 2.0 ports 1x HDMI port 1x USB-C port for CM4 Programming 1x Reset button 16x Digital Inputs (Isolated) 16x Digital Outputs (Isolated) |
| Expansion Options | 1x M.2 3042/3052 B-key (USB 3.0; USB 2.0) |
| Storage Options | Onboard eMMC up to 32GB 1x M.2 2280 B-key (SATA) |
| LAN Controller | Realtek RTL8153 |
| Input Voltage | 8~24 VDC |
| Power Input | 3-pin Terminal Block PoE PD 802.3at (Optional) |
| Operating Temperature Range | -20 ~ 60°C |
| Operating Humidity | 10% - 95% (non-condensing) |
| Dimensions (WxHxD) | 121 x 200 x 57.4 mm 4.76 x 7.87 x 2.26 in |
| Case Type | Compact Fanless |
| Case Material | Aluminum Plastic |
| Port Punchouts | 4 Antenna Holes |
| Regulatory Information | FCC 47 CFR Part 15 CE UL/ETL Listed configurations available CB scheme WEEE Directive (2002/96/EC) ErP Directive (2009/125/EC) Low Voltage Directive (2014/35/EU) Electromagnetic Compatibility Directive (2014/30/EU) Radio Equipment Directive (2014/53/EU) - For configurations with wireless transmitters RoHS 2 (2011/65/EU) RoHS 3 (2015/863/EU) REACH RCM VCCI-CISPR-32 EN 301 489-1 EN 301 489-17 EN 55032 EN 55035 EN 62368-1 IEC 62368-1 UL 62368-1 EN 301 489-52 UL/IEC/EN 61010-1 UL/IEC/EN 61010-2-201 IEC 60601-1-2 (4th edition) IEC 60945 |
| Warranty | 2 Year Limited Warranty on parts and services |
The link to this system configuration has expired. Please reconfigure this system to your specifications. If you need help, contact us at 03300 104 290.
The configuration you are trying to view is no longer available. The product will be shown with its default configuration. Please contact us if you have any questions, at 03300 104 290.
