IGN802 Raspberry Pi Industrial Controller with Ignition Edge

Based on our Factor 202, the OnLogic IGN802 is equipped with an embedded Raspberry Pi Compute Module 4 (CM4). Preloaded with Ignition Edge from Inductive Automation, the IGN802 features onboard digital I/O (DIO) and analog input, as well as an capacitive touchscreen.
  • Raspberry Pi CM4 with up to 8 GB of memory
  • Integrated touch screen
  • Processes up to 20,000 real-time tags
The maximum allowed quantity for this selection is 1. Your quantity has been adjusted.

Inductive Automation has changed how they handle Ignition licensing. As a result, this version of our system with Ignition pre-installed has been discontinued to allow you more flexibility to choose your ideal combination of Ignition license and OnLogic hardware.

Click below to explore the latest version of this product, and reach out to our team with any questions.

View the FR202

Call for More Information

+1 802 861 2300


Extended Support Program

5 year warranty protection, 24/7 support, advance replacement and more!

Get Details


Factor 202 Raspberry Pi Industrial Controller


The IGN 802 is a turn-key certified Inductive Automation industrial controller based on our popular Factor 202 and powered by a Raspberry Pi Compute Module 4 (CM4). You can configure the system with up to 8 GB of RAM, 32 GB of onboard eMMC storage and an M.2 SATA drive up to 2 TB. A combination of performance, power management, inputs/outputs and Ignition software enable the use of the IGN802 for virtually any solution requiring a control, mediation, or data acquisition device.




Fanless, solid state construction, an operating temperature range of -20° to 60°C, and a wide input power range, make IGN802 an ideal industrial deployment platform. Our custom designed carrier board features dual 1 GbE LAN ports, an RS-232/422/485 terminal block connector, a USB 3.2 port, 2x USB 2.0 ports, 1 HDMI, and 1 USB-C management port, used to configure the CM4 module. The IGN802 is an optionally PoE powered device (803.2at) enabling the use of low-power cabling for flexibility when ac power is unavailable.

Factor 202 Raspberry Pi Industrial Controller
Factor 202 Raspberry Pi Industrial Controller


With 16x digital inputs,16x digital outputs, 4x analog inputs and an 2.4" capacitive touch screen, you have the ability to receive data, program customized input screens and interface with Programmable Logic Controllers (PLCs). Whatever you need to control or connect to, the IGN802 is ready.



This system can be configured with an integrated cellular modem, pre-certified to operate on many of the world’s most popular cellular carrier networks. Our 4G capable hardware is ideal for today's mobile, edge computing and Industrial Internet of Things applications. The wireless connectivity has been tested to operate reliably in challenging Electromagnetic Compatibility (EMC) environments. Many of our systems also include co-location options allowing you to implement Wi-Fi and Bluetooth, in addition to cellular connectivity, at the same time. To take advantage of cellular connectivity, simply configure your system with one of our available cellular modems and then contact your carrier to activate.

Extrovert 4G LTE Connected Computers


Technical Specs
More Information
Hardware Line Industrial (Fanless)
Cooling Type Fanless
Processor Broadcom BCM2711 with ARM Cortex-A72
Processor Speed 1.5 GHz
Processor Generation Raspberry Pi CM4
Processor Cores 4
Memory Type LPDDR4
Memory Capacity 8 GB
Memory Speed 3200 MHz
Number of Displays Supported 1
Rear I/O 2x 1GbE LAN (Optional PoE PD Input)
1x RS-232/422/485 5-pin Terminal block
3-pin Terminal Block Power
4x Analog Inputs
2x Temperature input (RT100/1000)
1x SPI/I2C/UART/RS485 Header
Front I/O 1x USB 3.2 Gen 1 port
2x USB 2.0 ports
1x HDMI port
1x USB-C port for CM4 Programming
1x Reset button
16x Digital Inputs (Isolated)
16x Digital Outputs (Isolated)
Expansion Options 1x M.2 3042/3052 B-key (USB 3.0; USB 2.0)
Storage Options Onboard eMMC up to 32GB
1x M.2 2280 B-key (SATA)
LAN Controller Realtek RTL8153
Input Voltage 8~24 VDC
Power Input 3-pin Terminal Block
PoE PD 802.3at (Optional)
Operating Temperature Range -20 ~ 60°C
Operating Humidity 10% - 95% (non-condensing)
Dimensions (WxHxD) 121 x 200 x 57.4 mm
4.76 x 7.87 x 2.26 in
Case Type Compact
Case Material Aluminum
Port Punchouts 4 Antenna Holes
Regulatory Information FCC 47 CFR Part 15
UL/ETL Listed configurations available
CB scheme
WEEE Directive (2002/96/EC)
ErP Directive (2009/125/EC)
Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU)
Radio Equipment Directive (2014/53/EU) - For configurations with wireless transmitters
RoHS 2 (2011/65/EU)
RoHS 3 (2015/863/EU)
EN 301 489-1
EN 301 489-17
EN 55032
EN 55035
EN 62368-1
IEC 62368-1
UL 62368-1
EN 301 489-52
UL/IEC/EN 61010-1
UL/IEC/EN 61010-2-201
IEC 60601-1-2 (4th edition)
IEC 60945
Warranty 2 Year Limited Warranty on parts and services
Update Your Browser
You are using a web browser that isn't supported by OnLogic

Microsoft Internet Explorer version 11 and older, are not supported. You will experience challenges using our site and the checkout will not work. To get a better experience, go to one of these sites and get the latest version of your preferred browser.

We try to respond within the same business day.

If you need immediate pricing, call +1 802 861 2300.

Thank You For Your Request

Your request has been received by our Sales Team who will review the details and provide you with a quote.

If your project is time sensitive, please give us a call at +1 802 861 2300.

We can't process your request right now.



Success You have successfully shared this product

We can't process your request right now.

The link to this system configuration has expired. Please reconfigure this system to your specifications. If you need help, contact us at +1 802 861 2300.

The configuration you are trying to view is no longer available. The product will be shown with its default configuration. Please contact us if you have any questions, at +1 802 861 2300.