Loading...
Loading...
Loading...
Tech Explained30 October 20244 MIN READ

Regulatory Considerations for Computer Hardware - UL Certification and More

Global Certification on OnLogic Computer

Proof of hardware certification can be found on almost any electronic device, power supply, or charging brick. UL certification is one of the most common marks in the United States that you might find printed or etched on the side of a device. In fact there might be a parade of tiny logos, or marks including “UL,” “CE”, “FCC”, and more. These marks represent a big investment by device manufacturers, as they prove that testing and review has been performed to ensure safety and reliability in the applications and geographies they are designed for.

In development of electronic devices, you may ask yourself - how important are these certifications - are they really necessary? Whether you are a hardware manufacturer, a system integrator, or overseeing the IT department of a large business, it's important to understand how hardware certification can impact the deployment of products. 

Read on for information about how to avoid key stumbling blocks in the certification process and ensure a smooth rollout of your next development. You can also click the button below to explore how OnLogic can help you with your product’s testing and certification. 

OnLogic Certification Services

The two areas of regulatory compliance

Device certification most commonly comprises two areas of compliance:

  • Emissions and immunity compliance: Standards like FCC Part 151 and EN 550322 (for European CE mark) address radiated electromagnetic emissions and ensure that devices won’t conflict with nearby equipment. Other specs (such as EN 550353) ensure that devices won’t fail if used around radios or other radio frequency sources - -a characteristic known as immunity.

  • Product safety: Standards like UL/IEC/EN 62368-14 address safety characteristics, from the touch temperatures of external cases and components, to the presence of sharp edges and pinch points, to the use of internal fuses and self-extinguishing materials to limit fire danger.

The challenges of international hardware certification

Hardware certification compliance can be tricky. The process is relatively straightforward for domestic applications where computers are assembled of approved components. In the United States, FCC approval for IT may be a matter of sourcing all pre-certified FCC components and adding the correct messaging and labeling. 

Things get tougher as you cross international borders. Specs like EN 55032 and EN 55035 require CE technical files, or potentially more formalized testing at approved facilities. And while the European Union offers a unified certification target for its member nations, other countries may impose specific requirements that force additional testing and review. In short, it can get expensive.

Table 1: Some common certification marks and their geographic reach

Mark

Type

Geography

Standard

FCC

EMC

United States 

Part 15 (Class A or B)

IC

EMC

Canada shares similar rules as FCC

ICES-0035 (Class A or B)

UL

Safety

United States and Canada

UL/IEC/EN  62368-1

CB

Safety

Broad international acceptance at more than 50 countries (can reduce in-country testing in many geographies)

UL/IEC/EN  62368-1

CE

EMC & Safety

European Union and countries that recognize EU self declarations & certifications from an accredited labs (for example Australia and New Zealand)

EN 55032 (Class A or B)

EN 55035

UL/IEC/EN  62368-1

How to approach testing

Flexibility is key in a successful certification effort. 

  • Plan ahead.

  • Document thoroughly.

  • Seek broadly applicable certifications supported by testing at accredited laboratories.

  • When certifying devices, do so with maximal configurations.

    • Do this so that SKUs with fewer parts or lesser components (such as smaller hard drives) are covered under the tested profile.

  • Keep in mind that many countries build their requirements based on the same tests required for FCC, CE, and CB.

    • This means that entrance to markets like Japan, Australia, and New Zealand is sometimes possible with little more than a paperwork submission and an application fee.

To maximize global reach, a good approach is to pull together certifications for FCC Part 15, EN 55032, EN 55035 and EN/IEC 62368-1.

6 potential hardware certification pitfalls to avoid

Certification is a high-stakes business that will grind projects to a halt if you don’t stay on top of it. Here are six common pitfalls that companies encounter and ways to avoid them.

  • Poor awareness: Too often, companies embark on international projects with little understanding of local certification requirements. This can result in equipment being held up in customs for months. Know exactly what you need to pass muster in each country you operate in.

  • Procrastination: Certification is often a last-call item, brought up only when projects near completion, which is way too late. Put your regulatory team on the ground floor of any international project, so they have time to assess and procure required certifications. This can prevent show-stopping delays and painful budget overruns.

  • Design changes: A certified WiFi transmitter and antenna setup may not stay certified if you change the configuration--say by adding a second transmitter next to the first, or moving to a high gain antenna. Plan changes carefully and make sure you are covered, especially with certifications that involve wireless.

  • Chasing a global standard: There are so many national and international requirements for radio devices that it’s tough to adopt a single configuration across geographies. Be ready to establish localized configurations to meet country requirements.

  • Application-specific hurdles: Some equipment --such as medical devices - -impose heightened certification thresholds with specific testing and review requirements. Do your research and account for application-specific demands from the start.

  • Surprised by change: Nothing lasts forever, including certification requirements. Be alert for amended requirements, since they may force updated testing and review of previously approved product designs. Standards that have evolved in recent years include the change from EN 55022 to EN 55032, the consolidation of EN 55024 and EN 55020 to EN 55035, and the move from UL/EN/IEC 60950-1 to UL/EN/IEC 62368-1. 

Working with an experienced hardware partner who understands how to navigate the complex world of certifications can be invaluable. Many industries as well as countries have their own application-specific regulations and required certifications. Utilizing hardware that has undergone pre-certification, or working with a vendor experienced in regulatory compliance, can help ensure efficient deployment of your solution

Need help getting your innovation to market? We can help with testing and certification. Explore our services and contact us today!

OnLogic Certification Services

References

  1. FCC Part 15

  2. EN 55032

  3. EN 55035

  4. UL/EN/IEC 62368-1

  5. ICES-003

O
OnLogic
OnLogic
OnLogic is a global industrial computer manufacturer that designs highly-configurable, solution-focused computers engineered for reliability for the IoT edge.

Stay in the know.

Get first access to the newest products and Industry 4.0 innovation, OnLogic Live! events and more.