£2,403.23 £1,986.14
If your project demands the ultimate in computer performance, configuration, and capabilities, the Karbon 804 has you covered. Powered by 12th or 13th Gen Intel Core processing , Karbon 804 leverages Intel's unique hybrid core architecture, which adapts to your needs by directing the right thread to the right core. In addition to its advanced processing, Karbon 804's optional ECC memory, 4G and Wi-Fi compatibility (Wi-Fi 6e support coming soon) give you the capabilities you need now, and set your project up for success well into the future.
Looking for even more options? Explore the entire Karbon 800 Series.
The Karbon 804 has been engineered to give you options. Core components are protected from dust and debris in a fanless and ventless compartment at the top. Meanwhile, an expansion bay below provides space for additional configurability, including dedicated graphics, which can be cooled using a fan. Rugged features include 12 to 48 V DC power input, an operating temperature range of -40 to 70°C , and testing to MIL-STD-810 shock and vibration standards. The Karbon 804 has been tested for reliable operation in industrial, medical, automotive, rail and maritime applications. Available wall, DIN rail, and vibration isolating mounting kits give you a range of options for system installation. Wherever the edge of your project takes you, the Karbon 804 is engineered to perform.
The Karbon 804 can be configured with up to 22x LAN (6x 2.5GbE and 8x 1GbE onboard and using Modbay, and 8x via PCIe). PoE+ support is available on up to 10x of those ports (2x onboard, 8x ModBay), and Intel vPro support for remote out-of-band (OOB) management of the system is also available. Other connectivity includes dual DisplayPorts, 4x COM, 6x USB 3.2 Gen 2, dual SIM slots and integrated 20-pin GPIO (8-bit DIO, CAN bus, External Switch). A pair of our unique ModBay expansion slots let you further customize the system for your particular project with additional PoE, USB, COM, 10 GbE LAN or M12 connectors. PCIe Gen 4 expansion, either a single x16 slot or dual x8 slots, provides even more customization. Options include advanced networking and high-powered GPUs. Automotive power input and a customer-programmable Microcontroller Unit (MCU) for ignition timing control, further reinforce the installation freedom that the Karbon 804 provides.
This system can be configured with an integrated cellular modem, pre-certified to operate on many of the world’s most popular cellular carrier networks. Our 4G capable hardware is ideal for today's mobile, edge computing and Industrial Internet of Things applications. The wireless connectivity has been tested to operate reliably in challenging Electromagnetic Compatibility (EMC) environments. Many of our systems also include co-location options allowing you to implement Wi-Fi and Bluetooth, in addition to cellular connectivity, at the same time. To take advantage of cellular connectivity, simply configure your system with one of our available cellular modems and then contact your carrier to activate.
| SKU | K804 |
|---|---|
| Hardware Line | Rugged |
| Cooling Type | Hybrid Fanless/Actively Cooled |
| Processor | Intel Alder Lake Core i3/i5/i7/i9 Intel Raptor Lake Core i3/i5/i7/i9 |
| Processor Socket | LGA1700 |
| Processor Generation | Alder Lake Raptor Lake (13th Gen) |
| Processor Cores | Up to 16 (processor dependent) |
| Chipset | W680 |
| Graphics/GPU | Up to Intel® UHD Graphics 770 (processor dependent) |
| Memory Type | DDR4 SO-DIMM (non-ECC), DDR4 SO-DIMM (ECC) |
| Memory Capacity | 64 GB |
| Memory Speed | 2666 MHz |
| Memory Slot Count | 2.000000 |
| Number of Displays Supported | 2 native (4 with MST hub) |
| Rear I/O | 2x or 6x 2.5 GbE LAN (2x PoE optional) 2x USB 3.2 Gen 2 ports 2x DisplayPort 5-Pin Terminal Block Power Input (12~48 VDC) 2x ModBay Expansion (optional) |
| Front I/O | 4x USB 3.2 Gen 2 ports 2x COM RS-232/422/485 ports 1x GPIO Terminal block (DIO, CAN, Ext. Switch) 2x 3FF Micro-SIM 1x 3.5mm audio 1x Power button 1x External fan connector 2x 2.5” Hot-Swap Drives 7-9.5mm (optional) |
| Expansion Options | 1x mPCIe (PCIe x1; USB 2.0) 1x M.2 2230 E-key (PCIe x1; USB 2.0) 1x M.2 2280 M-key (PCIe Gen 4 x4) 1x M.2 2280 M-key (PCIe Gen 4 x4; SATA) 1x M.2 3042/3052/2280 B-key (PCIe x2; USB 2.0; USB 3.0; SATA) 1x PCIe Gen 4 x16 or 2x PCIe Gen 4 x8 1x PCIe x16 in x16 PCIe slot with dual height (4.4' H x 9.5" L) 2x PCIe x16 (8 lanes each) with single slot height (4.4" H x 9.5" L) |
| Storage Options | 1x M.2 2280 (SATA) 1x M.2 2280 (PCIe Gen 4 x4; SATA) 2x SATA 2.5" Drives (optional hot-swap) 1x M.2 2280 (PCIe Gen 4 x4) |
| RAID Support | 0/1 |
| LAN Controller | Intel I225-IT 2.5 GbE Intel I225-LM 2.5 GbE |
| System Monitoring | PTT in BIOS TPM (Optional) Watchdog Timer |
| Input Voltage | 12~48 VDC20~48 VDC (when configured with PCIe expansion 70W or above) |
| Power Input | 5-pin Terminal Block |
| Operating Temperature Range | -40 ~ 70°C (w/ 35W CPU) -40 ~ 50°C (w/ 65W CPU) |
| Operating Humidity | 10% - 95% (non-condensing) |
| Shock Tolerance (Operating) | Tested according to IEC 60068-2-27 and MIL-STD-810G (516.6) |
| Vibration Tolerance (Operating) | Tested according to MIL-STD-810G, Method 514.6, Category 4, Common Carrier over US Highways 1 hour per axis, 3 axes |
| Vibration Tolerance (Non-operating) | Tested according to IEC 60068-2-64, Category 3, Table A.6 3 axes, except hour/axes only and increase f2 from 150 Hz to 500 Hz, non-operating |
| Dimensions (WxHxD) | 240 x 143 x 267 mm 9.45 x 5.63 x 10.51 in |
| Case Type | Automotive Customizable Expandable Fanless Ruggedized |
| Case Material | Aluminum Aluminum Extrusion Steel |
| Port Punchouts | 12 Antenna Holes |
| Manufacturer Launch Date | Q2'22 |
| Regulatory Information | FCC 47 CFR Part 15 CE UKCA UL/ETL Listed configurations available Additional Safety and EMC certifications pending WEEE Directive (2002/96/EC) ErP Directive (2009/125/EC) Low Voltage Directive (2014/35/EU) Electromagnetic Compatibility Directive (2014/30/EU) Radio Equipment Directive (2014/53/EU) - For configurations with wireless transmitters RoHS 3 (2015/863/EU) REACH EN 50121-3-2 EN 50155 EN 55032 EN 55035 MIL-STD-810G Test UL 60950-1 UL 62368-1 |
| Warranty | 2 Year Limited Warranty on parts and services |
The link to this system configuration has expired. Please reconfigure this system to your specifications. If you need help, contact us at 03300 104 290.
The configuration you are trying to view is no longer available. The product will be shown with its default configuration. Please contact us if you have any questions, at 03300 104 290.
