1. Home
  2. OnLogic Systems
  3. Servers
  4. MK150 Technical Resources

MK150 Technical Resources

The MK150 can be opened by the user. This does not void the warranty, however, any damage caused by doing so will not be covered.

The following steps will walk you through opening your MK150 case, as well as auto-powering on and clearing CMOS.

Find your MK150 unit or model name on the right panel, and click on it to see the instruction set for it.

Opening the MK150 Case

The MK150 case is very simple to open. Remove the two screws from the sides and slide the lid off towards the rear.

MK150B-10

Mitac PD11BI-P Motherboard

Motherboard Manual

Drivers

How to Enable Auto Power On

  1. Power on the unit and press the Del key to access the BIOS
  2. Navigate to the Chipset tab
  3. Change “Restore AC Power Loss” to [Power On]
  4. Save changes and exit
  5. Auto power on is now enabled

How to Clear CMOS

  1. Locate the clear CMOS jumper
  2. Move the jumper over by 1 pin
  3. Wait 30 seconds
  4. Restore the jumper to its original position
  5. The CMOS is now clear

MK150B-30

Jetway NF9G-QM77 Motherboard

Motherboard Manual

Drivers

How to Enable Auto Power On

  1. Power on the unit and press the Del key to access the BIOS
  2. Navigate to the Chipset tab
  3. Open the “PCH-IO Configuration” menu
  4. Open the “High Precision Event Timer Configuration” menu
  5. Change “Restore AC Power Loss” to [Power On]
  6. Save changes and exit
  7. Auto power on is now enabled

How to Clear CMOS

  1. Locate the JBAT jumper
  2. Move the jumper over by 1 pin
  3. Wait 30 seconds
  4. Restore the jumper to its original position
  5. The CMOS is now clear

MK150B-51

ASRock E3C226D2I Motherboard

Motherboard Manual

Drivers

How to Enable Auto Power On

  1. Power on the unit and press the F2 key to access the BIOS
  2. Navigate to the Advanced tab
  3. Open the South Bridge Configuration menu
  4. Change “Restore on AC/Power Loss” to [Power On]
  5. Save changes and exit from the Exit menu
  6. Auto power on is now enabled

How to Clear CMOS

  1. Locate the CMOS battery
  2. Carefully remove it from the holder
  3. Wait 5 minutes
  4. Reinsert the battery
  5. The CMOS is now clear

MK150B-52

ASRock IMB-195 Motherboard

Motherboard Manual

Drivers

How to Enable Auto Power On

  1. Locate the AT/ATX jumper
  2. Move it over by 1 pin
  3. Auto power on is now enabled

How to Clear CMOS

  1. Locate the CLRMOS1 jumper
  2. Move the jumper over by 1 pin
  3. Wait 30 seconds
  4. Restore the jumper to its original position
  5. The CMOS is now clear

MK150B-53

ASRock IMB-1210 Motherboard

Motherboard Manual

Drivers

How to Enable Auto Power On

  1. Take the jumper circled in blue and move it to the pins circled in orange
  2. The unit is now configured for auto power on

NOTE: The blue jumper is for LVDS display output. As the MK150B-53 does not use LVDS, we can borrow that jumper to enable the auto power on.

How to Clear CMOS

  1. Locate the clear CMOS jumper
  2. Move the jumper over by 1 pin
  3. Wait 30 seconds
  4. Restore the jumper to its original position
  5. The CMOS is now clear

MK150B-54

ASRock C246WSI Motherboard

How to Enable Auto Power on

  1. Power on the unit and press the Del key to access the BIOS
  2. Navigate to the Advanced tab
  3. Open the Chipset Configuration menu
  4. Change “Restore AC Power Loss” to [Power On]
  5. Save changes and exit
  6. Auto power on is now enabled

How to Clear CMOS

  1. Locate the clear CMOS pads
  2. Short the two metal halves with a flathead screwdriver for 30 seconds
  3. The CMOS is now clear

MK150B-70

ASRock EPC621D4I-2M Motherboard

Drivers

How to Enable Auto Power On

  1. Power on the unit and press the Del key to access the BIOS
  2. Navigate to the Advanced tab
  3. Open the Chipset Configuration menu
  4. Change “Restore AC Power Loss” to [Power On]
  5. Save changes and exit
  6. Auto power on is now enabled

How to Clear CMOS

  1. Locate the clear CMOS pads
  2. Short the two metal halves with a flathead screwdriver for 30 seconds
  3. The CMOS is now clear
Updated on September 9, 2020

Was this article helpful?

Related Articles

Need Additional Support?
Can’t find the answer you’re looking for? Don’t worry, we’re here to help!
Contact Support