• Movidius VPU: How To Run The Zoo Demo Sample Code

    Install the zoo demo from the git repository. We urge customers to try this themselves to become familiar with the environment. The steps to run the zoo demo are listed below: Ensure that git and Python version 3.4 or newer is installed on the machine. Enter command git clone https://github.com/movidius/ncappzoo.git…

  • Movidius VPU: How To Install Hello_ncs.py

    The following guide will instruct you how to install Hello_ncs.py to test the interface between the system and the Movidius Accelerator in Ubuntu Operating Systems. The command line script within the SDK called hello_ncs.py will verify if the customer has the correct hardware installed and that it is functioning properly….

  • NWK200: AT Commands

    Report current status View the operational status of the modem using the AT command: Switching SIM Card Slots The NWK200 comes with two built-in SIM slots. It does not have any provision for automatic SIM switching, so a user must intervene in order to change SIMs. SIM slot 1 on…

  • NWK200: How To Configure The Access Point Name (APN)

    You should use the carrier specific firmware when available. If not available, and you are using the Generic firmware, you may have to configure the carrier’s APN before the modem will connect. Most carriers publish a FAQ for APN settings. Configure the APN using Skylight Windows users can download and…

  • NWK200: How To Connect To The Modem

    Connecting to modem via PuTTY (Windows) In the Device Manager, find out which virtual COM the modem is attached to. Open the ‘Modems’ category fly-out Right click the Sierra modem entry Select properties. The port number [n] is listed at the top of the main page Open PuTTY Select the…

  • Getting Started With The NWK200

    Introduction Product Description The OnLogic NWK200 4G modem supports 4G networks in EMEA/NA. The mPCIe form factor allows easy integration into smaller and thinner devices. Optimized for low power consumption, the NWK200 modem is ideal for today’s mobile computing, networking, and industrial IoT applications. This powerful LTE module supports transfers…

  • Getting Started With The CEC ADP107

    Introduction Description The ADP107 is a module that is installed in-line with the DisplayPort outputs on configured OnLogic computers. Its purpose is to enable Consumer Electronics Control (CEC) functionality which manages the connection between the system and any connected displays according to a set of pre-configured rules. This allows command…

  • Getting Started With Movidius

    Introduction Intel® Movidius™ Vision Processing Units (VPUs) are the industry’s first always-on vision processors. Movidius VPUs provide high-performance vision processing even in power-constrained environments, making them ideal for embedded applications. Intel’s Movidius Myriad™ VPU line includes the Myriad 2 and Myriad X. OnLogic offers a wide range of computer systems…