Neousys Rugged Intel Ivy Bridge Compact In-Vehicle Computer

SKU
Nuvo-3100VTC
High-performance, rugged automotive Intel Ivy Bridge computer for fleet management or mobile surveillance.
  • Up to Intel Core i7
  • 2 COM, Isolated DIO, Hot-Swap bay, 4 25.5 W PoE+ ports
  • Discounted while supplies last
Discontinued
The maximum allowed quantity for this selection is 1. Your quantity has been adjusted.

Call for More Information

+1 802 861 2300

 
Meet The Nuvo-7000LP

A Newer Alternative Of This System Is Available

 
Meet The Nuvo-7000LP 
 
Overview
 

EASILY POWER YOUR MOBILE APPLICATION

Designed with high-performance mobile applications in mind, the Nuvo-3100VTC is compact enough to be installed just about anywhere, while packing impressive Intel Ivy Bridge Celeron or Core processing power into a rugged, fanless chassis. Paired with the Intel QM77 chipset, this versatile system is ideal for fleet management and automatic vehicle location (AVL) applications.

 

RUGGED PROTECTION FOR MOBILE COMPUTING

In a fanless, ventless enclosure that protects against dirt and other debris, the Nuvo-3100VTC is protected from the risks of clogged fans or shorted components to ensure longer life of the hardware. The whole system is hardened against shock and vibration, and is rated for operation in temperatures as low as -25°C and as high as 70°C. The Nuvo-3100VTC's automotive power supply can interface with a vehicle's battery to protect the system and ensure ignition sensing and gentle shutdowns, extending the life of the system and protecting the vehicle battery from draining. The system is also E-Mark certified for in-vehicle applications.

 

CONNECTIVITY WHERE YOU NEED IT

The Nuvo-3100VTC provides a fully-featured, versatile platform, perfect for mobile surveillance applications. Connectivity options include 4 PoE 802.3at ports to power IP or PTZ cameras at up to 25.5 W per port, as well as DVI-I, 6 USB (including 4 USB 3.0), 2 RS-232 ports, and isolated DIO. With two PCIe Mini-Card slots, one of which is paired with a SIM card slot for use with cellular modems in asset tracking or AVL applications, the Nuvo-3100VTC is purpose-built to go anywhere. With an mSATA slot and mounting for two 2.5" hard drives or SSDs (including a hot-swap bay), the Nuvo-3100VTC is perfect for in-vehicle or remote data-logging.

 

Operating Temperature:

  • i7-3610QE (Max performance): -25°C ~ 50°C
  • i7-3610QE (Reduced Performance):-25°C ~ 60°C
  • i7-3610QE (Extended Performance): -25°C ~ 70°C
  • i5-3610ME (Max performance): -25°C ~ 50°C
  • i5-3610ME (Reduced Performance):-25°C ~ 70°C
  • i5-3610ME (Extended Performance): -25°C ~ 70°C
  • Celeron 1020E: -25°C ~ 70°C
 

DOWNLOADS

Custom branded computers

Product Customization

Add your brand and the features you need

 
Learn More 
Man holding computer

Personalized Attention

Take advantage of end-to-end project support

 
Learn More 
 
Technical Specs
More Information
SKU Nuvo-3100VTC
Hardware Line Rugged
Cooling Type Fanless
Processor Socket G2 (rPGA988B)
Processor Generation Ivy Bridge
Chipset Intel QM77
Graphics/GPU Intel HD Graphics 4000
Memory Type DDR3 SO-DIMM (non-ECC)
Memory Capacity 8 GB
Memory Speed 1600 MHz
Memory Slot Count 1.000000
Rear I/O 1 8~35 v 3-pin Terminal block power connector
1 Automotive timing setting switch
3 Antenna jacks
2 DisplayPort ports
2 USB 2.0
4 25.5 W PoE ports
1 8-bit isolated DIO port (4 in / 4 out)
Front I/O Power Button
4 USB 3.0 ports
2 Audio jacks; line-out, mic
1 DVI-I port
2 RS-232/422/485 COM ports
1 Locking 2.5" Hot swap hard drive bay
Expansion Options 1x mPCIe (full-size with USIM)
1x Half-size mPCIe
Storage Options 2.5" HDD/SSD
2.5" Hot-swap HDD/SSD
mSATA
LAN Controller Intel 82579LM PCIe GbE
Intel I210 GbE
System Monitoring AMT Support
Input Voltage 8~35 VDC
Power Input 3-pin Terminal Block
Operating Temperature Range -25 ~ 70°C
Operating Humidity 10% ~ 90% (non-condensing)
Shock Tolerance (Operating) Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, according to IEC60068-2-27)
Vibration Tolerance (Operating) Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64)
Dimensions (WxHxD) 210 x 62 x 165 mm
8.27" x 2.5" x 6.5"
Case Type Automotive
Fanless
Case Material Aluminum
Steel
Port Punchouts 3 Antenna Holes
Mounting Options Wall-mount
Manufacturer Launch Date Q4'12
Expected Life Cycle 5 Years
Regulatory Information FCC 47 CFR Part 15
CE
RoHS 2 (2011/65/EU)
RoHS 3 (2015/863/EU)
E-Mark
EN 50121-3-2
EN 50155
EN 55022
EN 55024
Warranty 2 Year Limited Warranty on parts and services
Notes
  • lease be aware, if configured with the automotive ignition sensing function, this unit will not power on with default AC adapter wiring. Please refer to the manufacturer's official documentation.
  • If you are looking to put your own drives with a height of 7mm in the hot swap bays we recommend the adhesive spacer be added to the drive due to fitment issues.
  • The system’s shock and vibration tolerances may vary depending on the configuration selected.
  • The system's operating temperature range is dependent on the operating temperature ranges of the individual components.
  • For a fully wide-temperature solution, please select the wide-temperature component options from the dropdowns above.
Update Your Browser
You are using a web browser that isn't supported by OnLogic

Microsoft Internet Explorer version 11 and older, are not supported. You will experience challenges using our site and the checkout will not work. To get a better experience, go to one of these sites and get the latest version of your preferred browser.

We try to respond within the same business day.

If you need immediate pricing, call +1 802 861 2300.

Thank You For Your Request

Your request has been received by our Sales Team who will review the details and provide you with a quote.

If your project is time sensitive, please give us a call at +1 802 861 2300.

We can't process your request right now.

Sender

Recipient

Success You have successfully shared this product

We can't process your request right now.

The link to this system configuration has expired. Please reconfigure this system to your specifications. If you need help, contact us at +1 802 861 2300.

The configuration you are trying to view is no longer available. The product will be shown with its default configuration. Please contact us if you have any questions, at +1 802 861 2300.