Loading...
Loading...
Loading...
Industrial IoTSeptember 26, 20233.5 MIN READ

Peak Shaving: What is it and how does it Reduce Energy Costs?

a photo of a green computer - a custom branded industrial raspberry pi used for peak shaving with a peak shaving graph

The energy industry uses the term peak shaving to describe the process of smoothing out power demands. Commercial and industrial customers can use peak shaving to eliminate demand spikes on energy resources. As a result, these customers can reduce their energy bills by reducing high demand charges. 

A graph of commercial power usage throughout the day might look spikey with multiple demand spikes throughout the day. It can also look a bit like a camel’s back where power requirements start low but ramp up quickly. There might be a drop in power usage over the lunch hour followed by another spike. As the day winds down, power needs decrease.

a graph showing peaks of energy usage over the course of the day

Graph shows a typical usage of power over the course of a day by a business consumer.

The consumer used peak power for a very short time. However, electric companies need the infrastructure to meet the maximum demand that may be required at any time – even though it may be not used most of the time. 

What is demand charging? 

Demand charging is a way for electric companies to more fairly distribute energy costs to large energy consumers – namely commercial and industrial users. With demand charging, energy companies bill the customer for the highest level of electricity that is demanded at any one time during the billing period. This demand charge is added to the basic consumption charges. Demand charges can be significant and can account for 30-70% of the overall bill. 

For example – let’s compare the fictional simplified energy bills of two fictional businesses that use the same amount of energy per billing cycle – 20,000 kWh. Business 1 had a peak demand of 500 kW and Business 2 had a peak demand of 250 kw. 

Energy Bill Line Item

Business 1

Business 2

Total Energy Consumption

Cost per unit $0.10

20,000 kWh x $0.10 = $2,000

20,000 kWh x $0.10 = $2,000

Demand Charge

Cost per unit: $7

500 kW x $7 = $3,500

250 kW x $7 – $1,750

Total

$5,500

$3,750

Reducing the peak demand and making the energy demand more uniform is the answer to reducing both impact on a grid for the energy provider and demand charges for the consumer. Peak shaving is one way to accomplish this goal. 

What is Peak Shaving? 

Peak shaving is when an energy consumer reduces power needs on the grid for a short period of time to avoid a spike in energy consumption. One way to accomplish this is to scale down production – obviously not a good choice. 

Another way to accomplish this is to rely on another source of energy to absorb the peak load. This process smooths out the curve and reduces demand charges.

a graph showing peaks of energy usage over the course of the day that are absorbed by peak shaving

Typical usage of power over the course of a day by a business consumer who uses peak shaving. The orange highlighted section reflects the power needs that are absorbed by an alternate energy source.

Example of a peak shaving solution

Greener Power Solutions developed a peak shaving solution. When power needs go above a certain threshold, their rechargeable battery system kicks in to fulfill the additional power needs to alleviate stress on the grid and deliver cost savings. The solution is controlled and monitored by their Energy Management System (EMS) solution built on the power of the Factor 201. Peak Shaving is just one of the innovative solutions using Greener’s mobile batteries. Other services and solutions include: mobile EV charging, green energy for events, and carbon-free construction sites. 

Custom branded solution

To enhance their brand recognition, Greener worked with the OnLogic team to create a custom branded solution – one that is green with their logo. You can personalize many of our systems with brand colors, logos and/or product name. Other branding opportunities include custom inserts and/or custom packaging. We’ll work with you to ensure your solution reflects your brand and presents the product information you need to convey. 

Developing your own innovative energy solution? OnLogic has years of experience working in the energy industry and we can help you make it possible! Contact the OnLogic team today.

Sarah Lavoie Content Creator for OnLogic
Sarah Lavoie
Content Marketing / Marketing, OnLogic
Sarah Lavoie is a content creator for OnLogic. When not writing, she can usually be found exploring the Vermont landscape with her camera looking to photograph something amazing.

Stay in the know.

Get first access to the newest products and Industry 4.0 innovation, OnLogic Live! events and more.