Loading...
Loading...
Loading...
Industrial IoTJuly 23, 202513 MIN READ

Industrial PC Buying Guide

How to Choose the Right Hardware for Harsh Environments, Tight Budgets, and Zero Downtime
a photo showing a wide variety of industrial computers from OnLogic

Selecting the right industrial computer for your project can feel like navigating a minefield. With countless configurations, form factors, and features, it’s easy to get lost in the technical jargon or make a decision that costs you significant time and money down the line. For innovators pushing the boundaries of what’s possible at the edge, a misstep in hardware selection can lead to costly downtime, missed deadlines, and project derailment.

Explore our Industrial PCS

This isn't just about picking an industrial PC; it's about making sure your critical industrial applications run flawlessly, day in and day out, no matter the challenge. We've seen the pitfalls, and we know the headaches they cause. That's why we've distilled our decades of experience into this industrial PC buying guide, revealing the most common industrial PC buying mistakes and, more importantly, how to avoid them. Get it right the first time, and you'll not only save your budget and your sanity but truly make it possible for your innovative solutions to thrive.

Defining your project's core requirements: Beyond the wish list

It might seem obvious, but before you select an industrial PC, the first crucial step is to clearly define what your project needs to achieve, not just what you want it to do. It’s easy to conflate aspirations with absolute necessities, especially when faced with the vast array of industrial computing solutions available. Your unique application will place very specific demands on the hardware, and understanding these early on can prevent significant headaches – and costs – later.

When approaching a hardware vendor, you'll likely have a baseline list of technical specifications. While helpful, the actual use case of the system in its industrial environment can impact your choice and configuration in unexpected ways.

What role will your industrial computer play?

If your industrial computer is part of a larger solution – perhaps embedded in industrial automation equipment, serving as a data logger, or powering an HMI (Human Machine Interface) – you need to establish its precise responsibilities. This clarity informs everything from memory and storage needs to processing power, expansion capabilities, and connectivity demands.

Consider these critical questions for your industrial computer deployment:

  • Data Handling: Will your system collect, process, and act on data locally? Or will it need to transmit data to a central server or the cloud? This directly impacts your requirements for wired or wireless network connectivity.

  • Peripheral Integration: What other equipment will your industrial PC need to interface with? Think about peripherals with proprietary connectors or systems requiring specific wireless protocols (like Wi-Fi or Bluetooth). A modular industrial PC design, like OnLogic's, offers the flexibility to add specialized I/O as needed, ensuring all your devices can connect seamlessly.

  • Network Infrastructure: Is your existing network infrastructure robust enough to accommodate new industrial computing devices? Planning this in advance can prevent bottlenecks and ensure smooth data flow from the edge to wherever it needs to go.

By thoroughly defining the "what," you're laying the groundwork for a hardware selection that’s truly purpose-built for you, avoiding common pitfalls and ultimately helping you make it possible to achieve your project goals.

Where will your industrial PC live? Understanding the installation environment

A woman kneels in front of robotic equipment - behind her is a box holding computer equipment.

Once you've clearly defined what your application needs to do, the next crucial question is where your system will operate. This is a primary factor in determining the type of industrial computer that will best suit your project, particularly if you're deploying a solution in an environment that’s less than hospitable to standard electronics.

If your installation environment is subject to:

...then it's imperative to account for these factors. Ignoring them can lead to costly downtime and hardware failure.

Protecting your investment: Fanless and rugged designs

Dust, dirt, chemicals, and moisture are true computer killers. Most traditional computer hardware relies on fans for cooling, drawing air – and contaminants – across heat-generating components. This particulate can quickly build up, causing overheating or shorting that can instantly destroy your system, leading to data loss and operational disruption.

This is where fanless systems become invaluable. They prevent this type of damage by using alternative cooling technologies, like heatsinks and heat spreaders, to passively cool the system. By eliminating the fan and utilizing sealed enclosures without openings, internal components are protected. When paired with solid state storage (SSDs), you get a truly solid-state solution with no moving parts, enhancing durability and reliability.

For applications in the most demanding industrial environments, consider a rugged computer. These systems use components rated for wider temperature ranges and are designed with fewer non-permanent connections and often include vibration-dampening technologies.

Key considerations for challenging environments:

  • Operating Temperature: If your application will expose the industrial computer to ambient temperatures below 0°C (32°F) or above 40°C (104°F), a rugged computer is likely essential. These systems feature components specifically rated for these extreme temperatures.

  • Vibration and Impact: In settings with frequent or prolonged vibration or impact forces (common in vehicles or on machinery), rugged systems are built to withstand the punishment. Look for features like cable retention on ports to prevent disconnects.

  • Electromagnetic Compatibility (EMC): Rugged computers typically offer superior EMC protections, often exceeding industrial standards for maximum system integrity in electrically noisy industrial settings.

Mounting and enclosure solutions for industrial PCs

Sometimes, the most practical or cost-effective solution is to use an additional enclosure for your hardware, especially for outdoor installations. If you opt for an enclosure, always evaluate the internal airflow to determine if additional cooling is required.

Regardless of your chosen system or enclosure, consider your mounting options in advance. Many computing solutions can be wall or VESA mounted, though additional brackets may be necessary. Planning your installation strategy ensures seamless integration and reliable operation, helping to make it possible for your hardware to perform under pressure.

Side view of an OnLogic Helix 521 industrial computer mounted to the back of a monitor, showcasing USB and LAN ports.

What technical specifications does your project demand?

This is often where hardware project evaluations begin, and for good reason. You likely have a precise list of specifications and features your industrial computer needs to have. Your needs will, of course, be unique, and the importance of individual configuration options will vary widely. But be sure to consider each of the following carefully, as they form the backbone of your system's performance and reliability.

Processing power: The brains of your operation

The CPU is the powerhouse of your industrial PC, and choosing the right one can be surprisingly complex. Factors like minimum software requirements, power consumption, thermal management, and the number of simultaneous tasks the system will handle all play into your choice across the wide range of available processors from Intel®, AMD, and others.

Picture of the inside of an OnLogic industrial NUC

For modern high-performance edge computing applications, consider processors with integrated specialized accelerators like Neural Processing Units (NPUs) or dedicated Graphics Processing Units (GPUs). These are essential if your tasks involve AI inference, machine learning, or complex vision processing.

Your team might also have preferences or concerns about specific processor manufacturers. This is where partnering with an experienced hardware vendor pays dividends. We can leverage our vast experience configuring systems for similar industrial applications to help inform your decision, ensuring you get the right processing power without overspending.

I/O ports: Connecting and collecting your data

How your industrial computer connects to the rest of your infrastructure is a critical element for an easy and reliable installation. You'll need to carefully consider and account for:

  • LAN ports for networking

  • Serial Ports for machine-to-machine communication

  • Video Outputs for display interface

  • USB ports in varying generations and form factors

Look for systems that offer modular I/O options. This allows you to customize the I/O coastline, adding specialized industrial connectors, additional LAN ports (e.g., 2.5GbE or 10GbE), or Power over Ethernet (PoE) as needed. This high configurability is a key OnLogic differentiator, ensuring your system is truly purpose-built for you. In some cases, however, you may be limited by what's available on the motherboard, so understanding your exact needs upfront is crucial.

Keep in mind that I/O ports are also a common entry point for adverse electromagnetic compatibility (EMC) conditions. Knowing your desired I/O complement can mitigate unexpected complications during rollout or testing for any industry- or application-specific certifications.

Storage: Securing your data

The amount and type of storage you select will go a long way to future-proofing your chosen computing solution. Think not only about how much space you need now, but also how much you might need in the future. While storage can sometimes be upgraded, it's best to consider your long-term needs to prevent data overruns that could require additional external hardware.

For most industrial applications, solid state drives (SSD) will be preferred for their durability and speed, but for some use cases, traditional spinning drives may be a viable, cost-effective solution. Also, consider how you'll architect your data and whether you'll need to set up a RAID solution to protect mission-critical information.

This is also the stage where you'll want to balance local storage and processing versus what can be stored and/or processed in the cloud. On-premise Edge Servers, for example, are an increasingly popular option to help minimize both latency and bandwidth costs, connecting your edge computing efforts seamlessly.

Memory: Speed and multitasking

The amount and type of RAM you choose will greatly impact your system's operating speed. Like the CPU selection, your memory choice ensures the system can perform the requisite simultaneous tasks your project demands. More RAM generally means better multitasking capabilities.

Remember there's a limit to the amount of RAM a given motherboard can support, and its frequency needs to match what's supported by the motherboard. Higher RAM frequencies ensure faster data transfer, which makes for quicker task processing. Motherboard specifications will also dictate whether the system supports dual-channel communication with the memory controller, effectively doubling RAM bandwidth. Again, working with an experienced hardware vendor can take a lot of guesswork out of this process, helping you find a right-sized solution that optimizes performance.

Power: Ensuring your system runs reliably

The installation location for your systems will inform how they're powered, so ensure your chosen system supports both the input voltage and connection standard available. For instance, if you'll be directly connecting your systems to a shared power source, they may not each require a separate power adapter, which could yield significant cost savings.

Many industrial computers offer support for variable power input, ranging from 9-48VDC, providing flexibility. However, it's critical to understand your specific power setup in advance. Be aware that many systems require a power adapter to properly protect from damage or malfunction. Only a subset of systems can run on DC power, and even fewer can run on a DC power system shared with other devices. Having a clear understanding of your power system is crucial to ensuring a safe and reliable installation, helping us make it possible to avoid unexpected power issues.

Wireless connectivity: The key to data access at the far edge

Wireless connectivity is ubiquitous in consumer devices, but industrial systems most frequently need to be specifically configured with the desired wireless card if Wi-Fi, Bluetooth, 4G, or LoRa connections are necessary. Beyond the card itself, consider the number, type, and size of antennas you'll need. Integrated antennas are seldom sufficient, particularly in challenging industrial settings, to enable reliable connectivity.

If space is at a premium, this becomes even more important. There are also legal constraints regarding antenna gain that can differ by geographic location, as well as functional constraints including antenna polarization and coax loss, all of which are also dependent on the number of total radios in the device. Having a plan for where and how antennas will be installed or mounted is imperative for seamless edge computing and data flow.

Operating system and other software: Building out your solution

Your choice of operating system will be informed by the software or industrial applications you intend to run. Understanding which flavors of Windows, Linux, or your OS of choice, that your selected hardware will support, or can be pre-configured with, will save you a lot of potential compatibility headaches. For some embedded industrial applications, you may not require a pre-installed OS, which can save significant cost, but it's important to verify that upfront.

Finally, understanding the entire software stack that will be installed on the system can inform everything from CPU selection, to RAM requirements, and storage needs. You may also be able to leverage your hardware vendor to pre-image any software prior to shipping your systems, saving you a great deal of time and making fulfillment to your customers or installation into your products or facility much easier. This is another area where our technical expertise and direct sales model can provide an easy to work with solution, allowing you to focus on your core competencies.

Planning for success: Timeframes, quantity, and long-term lifecycle

A man getting a package ready to ship with OnLogic shipping labels

Beyond the technical specs and environmental considerations, understanding the logistical aspects of your project is crucial. Getting clarity on your project timeline and the scale of your deployment can significantly impact hardware availability and overall project success.

Your Project Timeline: Anticipating Needs

Going into a project with a clear timeline helps ensure your chosen hardware provider can meet your demands. Consider:

  • Prototyping and Testing: Will you need a hardware prototype? How long will testing on that prototype take?

  • Rollout Schedule: Based on your testing, work with your hardware provider to build a precise rollout schedule.

Being upfront with your suppliers about when you need products, and if you expect recurring orders, helps them ensure an interruption-free supply chain. A short timeline might limit your configuration options based on available stock, so communication is key.

Quantity and lifecycle: Building for the long haul

In addition to when you need that first order, inform your hardware vendor about how many systems you'll require, and over what amount of time. Providing an accurate forecast can significantly reduce instances of backorders or component shortages impacting your project. Our direct sales model and in-region resources are specifically designed to support this type of transparent, long-term planning, fostering a truly trusted partnership.

A particularly vital consideration for industrial applications is component lifecycle. Manufacturers constantly update their offerings. While great for consumer electronics, these changes can have far-reaching impacts on an industrial computing project. If you expect to need a precise system configuration over a long period, it's critical to understand the lifecycle of your chosen system and its components. This ensures availability for the entire life of your project.

Consider if the hardware platform allows for scalability (e.g., CPU, GPU, AI accelerators) without requiring a complete system redesign. This enables you to adapt to future needs or share compatible software images across different performance tiers, making your solution truly purpose-built for you for years to come.

  • Revision Sensitivity: In some instances, even minor component changes (e.g., a different brand or capacity of hard drive) can be highly impactful. Manufacturers of medical devices, for example, often require full re-certification for even a single component change, which can be expensive and time-consuming. Be sure to consider if your project is revision-sensitive and communicate this clearly to your hardware vendor. This allows them to work proactively with you to anticipate any potential impacts over the life of your project, helping to make it possible to avoid costly disruptions.

Beyond the hardware: Budget and partnering for project success

Every decision point in a project ultimately circles back to the budget. While you'll certainly want to get the best value from your hardware investment, it’s crucial to weigh the "soft costs" in your calculations. Sometimes, saving a few dollars upfront can lead to significantly higher expenses down the line.

Balancing cost and reliability: The real budget

For many industrial automation, edge computing, or IoT projects, there's very little tolerance for hardware failures. Downtime can cost hundreds of thousands of dollars in lost revenue, often in just a few hours, depending on the application. For instance, choosing less robust components like spinning hard drives over solid state drives (SSD), or selecting an industrial system for an industrial environment that truly requires a rugged computer, can end up costing your organization far more if failures occur. Investing in durability often pays dividends in reduced maintenance and uninterrupted operation.

On the flip side, an experienced hardware vendor can often help you save money by suggesting the right-fit solution, rather than simply providing a one-size-fits-all device that might be overkill for your project. Having a clear idea of your overall project budget, as well as a target per-system price, will help align expectations and guide the configuration process. This collaborative approach is a hallmark of our direct sales model and technical expertise, ensuring you get a purpose-built solution that fits your financial parameters.

Leveraging additional services: Streamlining your workflow

While this guide has focused on selecting the core hardware for your project, it’s vital to investigate the full range of services your chosen vendor can provide. If computer hardware isn't your company's core specialization, a partner like OnLogic can take significant tasks off your plate, allowing you to concentrate on what you do best. This can truly make it possible for you to scale your operations efficiently.

Consider how these services could integrate into your overall hardware program, especially as you move toward mass production:

Taking stock upfront of what you might be able to offload to your hardware provider can help avoid delays down the line. It's about finding a trusted partnership that simplifies your supply chain and accelerates your time to market.

Ready to select your ideal industrial PC?

Choosing, configuring, testing, and fine-tuning your hardware-based project is a complex undertaking. That's precisely why it's so important to go into the process as prepared as possible. Even with a clear understanding of your needs, curveballs can happen.

Working with an experienced industrial computer company like OnLogic, one that specializes in the type of computing solutions you need, goes a long way toward making the process easier and giving you the confidence to take your project from idea to reality. Our technical expertise and commitment to a trusted partnership are here to make it possible for you.

For projects demanding the latest in AI-ready performance and robust reliability, explore our cutting-edge Helix 520 Series of industrial computers.

The 5 models in the Helix 520 Series of industrial computers from OnLogic

Don't miss a step: Download our free checklist!

Want a handy, printable list of the key questions from this guide to streamline your hardware selection process? Download our Industrial PC Selection Checklist now.

Download the Checklist

Have questions? We're here to help.

Once you've considered these critical questions, contact our team for personalized advice on choosing the OnLogic system that's right for your unique project. Browse our full line of industrial computers.

Author Image of Darek Fanton
Darek Fanton
Communications Manager, OnLogic
Darek is the Communications Manager at OnLogic. His passion for both journalism and technology has him on the lookout for the latest in emerging tech and the best ways to share that information with readers. In addition to his affinity for words, Darek is a music lover, juggler and fan of terrible jokes.

Stay in the know.

Get first access to the newest products and Industry 4.0 innovation, OnLogic Live! events and more.