Loading...
Loading...
Loading...
Tech ExplainedAugust 28, 20233.4 MIN READ

Ignition Sensing for Vehicles using OnLogic’s Karbon Series

key in ignition

What is ignition sensing?

Timeline of events for Karbon series ignition sensing

Ignition sensing is a critical feature for in-vehicle computers allowing a system to detect the ignition key state and safely shutdown the system when the vehicle is shut down. This protects data stored on the computer and the vehicle battery life. Rugged computers from OnLogic offer a wide range of customization of this feature. Let’s take a look at some of the advanced programmable power-saving features of ignition sensing computers from OnLogic:

  • Programmable sleep and shutdown delays options: 

    • When vehicle power is switched off, these settings can keep the PC running for a set period of time. This could be anywhere from a few seconds to a few hours. When the set time elapses, the PC can hibernate or power down until the vehicle is started again. This “countdown active delay” is completely programmable. For the Onlogic Karbon series of systems, it can be adjusted through OnLogic’s Micro Control Unit (MCU).

  • Programmable startup delays: 

    • When vehicle power is switched on, these settings can turn the PC on after a programmed delay. This could be anywhere from a few seconds to a few hours to account for events where the system would not be needed (e.g. turning your vehicle on to roll up your windows).

  • Shutdown voltage thresholds: 

    • Programmable levels where the PC will shutdown before battery voltage goes below battery damage voltage.

What is ignition sensing used for?

Ignition sensing is used for various in-vehicle applications, and can be used to help devices such as panel PCs and dash cams remain on for a preset amount of time after the engine has been turned off.

Let’s look at some specific examples.

On-board delivery driver solutions

In-vehicle panel PCs are often used to display the delivery route for the drivers to follow. Without ignition sensing technology, when the driver turns the vehicle off, the panel PC would also turn off. When the driver turns the vehicle back on, the system and software would have to reboot. The driver would then need to wait for the system start-up to complete, log back in on a touchscreen keyboard, and then start the navigation app back up again before continuing on their route. Not only is this process tedious, but the time required to do this (usually requiring a few minutes) adds up and can impact delivery schedules. 

Anti-idling solutions

In states with anti-idling laws, cars are not permitted to idle for longer than the specified amount of time, with some states prohibiting idling altogether. This means that some delivery drivers may need to turn their vehicle off and back on again several times throughout the day, further adding to the amount of time spent waiting. With ignition sensing, the panel is able to remain on and the application can keep running. By eliminating time required to boot a system without ignition sensing, the driver can gain significant time-savings that are compounded over the course of a day’s route.

Dash cam solutions

Ignition sensing can also be used with dash cams to continue recording even after the vehicle has been turned off. Many police vehicles, for example, utilize dash cams to help with training purposes and record video evidence. When a dash cam is connected to a system via PoE, ignition sensing allows an environment to continue being recorded even if the vehicle is turned off without the risk of draining the vehicle’s battery beyond target thresholds. 

Getting started with ignition sensing

A photo of the Karbon 800 series from OnLogic

At OnLogic, we offer a wide range of ignition sensing systems for your in-vehicle application, including our Karbon 800 series. For applications that require PoE (such as for use with an in-vehicle camera), OnLogic’s Karbon 800 Series features up to six 2.5 GbE LAN ports. Two of these LAN ports can be configured to deliver PoE, and provide up to 32W of combined power.

Still not sure where to start? Reach out to our team of experts for help today.

Claireice Mathai
Claireice Mathai
Claireice Mathai is a content creator for OnLogic. When not writing, she enjoys playing guitar and gaming.

Stay in the know.

Get first access to the newest products and Industry 4.0 innovation, OnLogic Live! events and more.