Rugged In-Vehicle Digital Media Player

SKU
DTS-RT130
Advanced rugged digital media player capable of simultaniously powering multiple mobile displays for infotainment or advertising in automotive environments, with Intel Core i7 processing able to easily reproduce crystal clear HD graphics or video.
  • Vibration-resistant construction ideal for automotive installation
  • Built-in wireless capability for streaming playback
  • Trackable anywhere with GPS-based geolocation from built-in SIM card
Special Order
The maximum allowed quantity for this selection is 1. Your quantity has been adjusted.

Call for More Information

+31 88 5200 700

 
Overview
 

TAKE YOUR DIGITAL MEDIA ON THE ROAD

The DTS-RT130 is a digital media player featuring the high performance Intel Core i7-3517UE processor. A DisplayPort and DVI-I port allow for dual independent displays to play on opposite sides of a vehicle, perfect for environments like buses where multiple monitors can make a big difference. Automotive installations require a system that can withstand vibration and shock as well as wide variability in temperature. The DTS-RT130 is fully operational in environments between -40°C to ~70°C, and was designed without a fan in order to increase reliability in vibration-prone environments. The fanless design removes the fan as a point of failure to extend the system's reliability while protecting it from dust, dirt, and debris. Compliant with MILSTD-810F for both vibration and shock resistance, this tough PC can handle any automotive condition.

 

THE POWER TO CONNECT

Capture a competitive edge in your market with GPS-based geolocation. The built-in SIM card shows you exactly where your unit is, allowing for content customization based on location. This system boasts 802.11b WiFi, Bluetooth 4.0, GPS, 2G and 3G – a powerful combination for superior connectivity. Upload speeds up to 5.76 Mb/s and download speeds up to 7.2 Mb/s enable fast data transfer, and the assisted GPS (A-GPS) uses cell towers to connect in challenging environments like parking garages and urban canyons. The included Intel Wi-Fi/Bluetooth card supports wireless Intel Active Management Technology, Wi-Fi Direct, and Wireless Display.

 

MULTIPLE DISPLAYS FOR A LASTING IMPRESSION

Perfect for buses, taxis, and other mobile environments where more than one screen needs to be displayed, the Intel Core i7 processing power of the DTS-RT130 is capable of handling dual HD displays at once. The wide-input power supply offers reliable power from 9~32 V, while onboard automotive intelligence prevents deep discharging a vehicle battery and ensures the reliability of both vehicle and system as well as providing shutoff delays for applications where the vehicle makes frequent stops. The DTS-RT130 is no slouch when it comes to connectivity, either, featuring four Gb LAN ports, 8-bit programmable DIO, three RS-232 COM ports (two of which also support RS-485), DVI-I and DisplayPort for video, and dual 2.5" hard drive.

 

DOWNLOADS

 

Downloads

 

Drivers

 
Technical Specs
More Information
SKU DTS-RT130
Processor Speed 1.7 GHz
Processor Generation Ivy Bridge
Processor Cores 2
Chipset Intel QM77
Graphics/GPU Intel HD Graphics 4000
Memory Type DDR3 SO-DIMM (non-ECC)
Memory Capacity 8 GB
Memory Speed 1600 MHz
Memory Slot Count 1.000000
Rear I/O 1 DVI-I port
1 DisplayPort
1 CAN bus punchout (optional)
2 RS-232/485 COM ports
1 RS-232 COM port
1 8-bit DIO port
4 Wireless antenna jacks
1 4-pin terminal block power connector
Front I/O 4 USB 3.0 ports
4 Gb LAN ports
2 SIM Card slots
2 Antenna holes
Power button
2 Externally accessible HDD bays
Expansion Options 1x Full-size mPCIe slot
Included Storage 60 GB Wide Temperature SSD
Storage Options 2.5" HDD/SSD
mSATA
SIM Card (Externally Accessible)
LAN Controller Intel I210-AT GbE
Input Voltage 9~32 VDC
Operating Temperature Range -40 ~ 70°C
Shock Tolerance (Operating) MIL-STD-810F, Method 516.5, Procedure I
Vibration Tolerance (Operating) MIL-STD-810F, Method 514.5, Category 20
Dimensions (WxHxD) 250 x 55 x 150 mm
9.8" x 2.2" x 5.9"
Case Type Automotive
Fanless
Ruggedized
Port Punchouts 2 Antenna Holes
Included Accessories Vibration isolating mounting brackets
Terminal Block connectors for DIO and power
Screws
Notes Fully integrated system backed by our product warranty & support program.
Please allow 3-5 days for build completion.
Need more options? Please see the standard RT130.
The RT130 is also available with a built-in uninterruptible power supply (UPS). Please inquire at +31 88 5200 700 for details.

We try to respond within the same business day.

If you need immediate pricing, call +31 88 5200 700.

Thank You For Your Request

Your request has been received by our Sales Team who will review the details and provide you with a quote.

If your project is time sensitive, please give us a call at +31 88 5200 700.

We can't process your request right now.

Sender

Recipient

Success You have successfully shared this product

We can't process your request right now.

The link to this system configuration has expired. Please reconfigure this system to your specifications. If you need help, contact us at +31 88 5200 700.

The configuration you are trying to view is no longer available. The product will be shown with its default configuration. Please contact us if you have any questions, at +31 88 5200 700.