Home>Posts>Technology>SolidLogic Core 2 Duo Mobile Mini-ITX Rackmount System

SolidLogic Core 2 Duo Mobile Mini-ITX Rackmount System

By ·Categories: Technology·Published On: March 31st, 2008·2.4 min read·

I am happy to announce the release of our first Mini-ITX Core 2 Duo rackmount system. As a technical sales associate with Logic Supply, I can attest for the incessant demand for a “high-end, power-efficient, reliable, small, low-heat, low-noise, cost-effective, Linux-capable, RAID-capable, Mini-ITX, 1U height, rackmountable system.” Jeez, that was mouthful!

Since the advent of the Mini-ITX form factor (6+ years ago), users have continually asked for more. It wasn’t enough that the manufacturers had managed to standardize on a fully integrated, x86 mainboard that crammed all necessary circuitry into a 17cm x 17cm board and chugged along at 500 MHz clock speeds. No, users wanted a Pentium 4, 2.4GHz CPU with an 800 MHz FSB, socketed to a 7 layer board with 200+ watts pulsing through it with PCI Express, 4x SATA, Gb LAN, DirectX 9 (or better), etc. Anyway, you get the point. Mini-ITX was revolutionizing small form factor (SFF) computing and users realized its capabilities quickly, but wanted, AND EXPECTED, more!

There once was a day when I turned away all inquiries for any Intel-based Mini-ITX system. The boards ran too hot for the compact, miniaturized chassis’ designed for Mini-ITX boards and they sucked more power than the tiny, fanless, DC-converting PSUs could provide (ATX PSUs are typically too large and hot for a SFF chassis). Occasionally, I could convince the user (from novice end-user to a Boeing aircraft engineer) that they may not need all that computing power, but more often than not, the prospect couldn’t sacrifice the performance and moved on, settling for another generic, beige box, ATX power hog.

Well, times have changed! Intel and AMD finally came to their wits and realized if they played the Moore’s Law game any longer they’d be burning people’s houses down with 8GHz, megawatt consuming, fireballs. CPUs have finally become smarter with multiple cores, smaller dies, and more efficient instruction sets. Meanwhile, PSUs have become smaller with more output capabilities. These progressions have opened the doors to higher-end computing in smaller packages. We’ve offered you Intel-based systems now for a few years, and even a few AMD S1 options, by shoe horning these boards into a variety of Mini-ITX enclosures, but the 1U height rackmount was our last frontier. We needed a well-ventilated enclosure with enough juice to power the moderately power-efficient Core 2 Duo mobile boards.

In addition, it only made sense to pursue this system if we could offer up enough space for peripheral expansion to accommodate the variety of applications this machine could cover. More importantly, though, our configuration required a very low-profile, cool running, highly robust board. It needed diverse I/O, RAID and SATA controllers, Gigabit LAN, PCI Express, 3D and HD capable integrated graphics, power management features, temperature monitoring, and ensured dependability with a watchdog timer and wide temperature operation.

Ultimately, we’ve wished to offer you a well rounded, versatile, Intel-based system. We hope we’ve delivered.

Comments, questions, and suggestions are encouraged.


About the Author: Jeremy Hudson

I've been in technical sales and business development with Logic Supply since late '05. I have a background in business with a concentration in computer and information systems. Although I enjoy the technical geek stuff, I'm also a "right brain" kind of guy --I enjoy art, photography, deep powder days on my snowboard, and sporadic day trips around New England.
Follow OnLogic on LinkedIn


  1. Peter A. Frisch April 1, 2008 at 3:56 pm

    With VIA’s announcement of NAS 7800-15T it would be good to see a rackmount case that would hold the motherboard and all of the drives that could be used. Yes, that would be more that 1U, but no more than 3U. Hot swap 3.5″ trays would be nice too, but not manditory. I do hope that RAID 5 drivers are available for Linux so that the NAS would boot from a flash module/compact flash card. There is nothing wrong with a case that needs rails either.

  2. Matt May 8, 2008 at 2:41 pm

    Most organizations that utilize a rack are doing so because they have to support a large user base. The rack enables them to stack a numerous amount of servers that wouldn’t be possible with the form factor of the standard box. Why would one choose to fill their rack with such a low level of capability when their goal is to increase service availability with superior performance?

  3. Jeremy May 8, 2008 at 3:24 pm

    Matt, thanks for writing!

    You make a good point. We’ve traditionally passed on creating a rackmount solution because the market is flooded with highly capable systems and we’ve had a focus on small embedded appliances, but the demand has kept up and we couldn’t keep passing. This system isn’t a solution for all, but the truth is some folks require a low powered, low noise server without all the horse power (and cost) of the latest hot rod Xeon.

Leave A Comment


Have a project? Let's talk

More Articles


Learn the 5 ways Fanless Computers can help your business

Get the Whitepaper
View All Articles

OnLogic Industrial Computers

Discover OnLogic's multitude of industrial computers that will help you to advance your IoT project

Shop OnLogic

Learn more at OnLogic.com

OnLogic Industrial PCs: Designed to last. Built to order. Delivered in days. Visit our online store at OnLogic.com